Reports
inSCADA provides a simple, convenient method for reports. This method allows you to generate your basic reports for your facility of installation within a few minutes.
On the screen shown in Figure 1, the tables in panels A, B, C and D are linked to each other as Master-Detail.
To create a report, we need to enter the configuration parameters via the panels shown in Figure 1.
Project
Choose the project for which the report will be generated.
Name
Report name. This is also the left-handed title that will appear on the report output.
Description
Report description. This is also the right-handed title that will appear on the report output.
No
Report number. The report appears in the upper left corner.
Period
Determines which base-period the report will be in. In inSCADA, reports can be set daily on an hourly basis and monthly on a daily basis.
Print
Specifies whether to send the report to the printer.
Report Time
The report time determines the interval at which the report calculations are performed. Report Hour; the start and end time of the day, Report Day; determines the start and end day of the month. Thus, when a daily report is made, the daily calculations are calculated based on the defined hours interval. Likewise, monthly calculations are made based on the defined day interval in monthly reports.
Print Time
Activated if Print is selected. Defines the time at which the report is automatically sent to the printer.
The report that we created in this section on the form is automatically selected in the Report section. Here we create our sub-groups that depend on our report.
Name
Report group name. The group name that appears in the report output.
Group Order
Determines the order of groups from left to right on the output.
We are done configuring part B of Figure 2.
The group that we have created in section B on this form is automatically selected in Group section. Here we form our sub-groups that depend on our group.
Name
Report subgroup name. The subgroup name that appears in the report output.
Subgroup Order
Determines the order of subgroups from left to right on the output.
We are done configuring part C of Figure 3.
On the form shown in Figure 6, we select our variables for the groups we created in the previous step.
Subgroup
Specifies the selected subgroup.
Name
A descriptive name for our Variable value.
Variable Order
It determines the order of display of Variable values from left to right under the subgroup.
Calculation Type
The calculation type specifies the value of the selected variable that we want to appear in the report. These are;
Min
Max
Avg
Sum
Count
First Value
Last Value
Integral
Max Difference
The selected calculation type allows the above listed values of the selected variable to be calculated and returned to the report in accordance with the reporting period.
Variable
This is the field, where we select the variable that we want to see in defined column.
Total
This is the field where the variable we want to see as total/average is selected at the bottom of the defined column. The variable selected here is calculated according to the report interval.
Deviation
This is the field where we select the variable that we want to see the deviation, along with total variable, at the bottom of the defined column. The variable selected here is calculated according to the report interval.
Last updated